LED Controller Set Fetures
Ultra-sensitive touch wheel: Adjust brightness smoothly and precisely with just a swipe on the RT1 remote. Giving you full control over your lighting by using this RF LED controller kit.
Remote control with smart presets: Five quick brightness keys and four scene memories make it easy to set your favorite lighting instantly. Includes a 30-second delay-off for added convenience.
Flicker free dimming: Enjoy smooth brightness transitions and on/off switching without any flickering, protecting your eyes and creating a comfortable ambiance. Can work with our single color COB LED lights strips.
External push switch compatible: Connect a standard wall switch to easily turn lights on/off and adjust brightness, offering flexible control options for any setup.
Customizable fade time: Set the light on/off fade time up to 3 seconds for seamless, elegant transitions that enhance the mood of any room.
RF Dimming Single Color LED Controller Kit Parameters
V1 LED Receiver’s Input and Output
Input voltage: 5-36VDC
Input current: 8.5A
Output voltage: 5-36VDC
Output current: 1CH,8A
Output power: 40W/96W/192W/288W (5V/12V/24V/36V)
Output type: Constant voltage
RT1 LED Remote’s Input and Output
Output signal: RF(2.4GHz)
Working voltage: 3VDC(AAAx2)
Working current: <5mA
Standby current: <10μA
Standby time: 1 years
Remote distance: 30m(Barrier-free space)
Dimming data
Dimming level: 4096 levels
Dimming range: 0 -100%
Dimming curve: Logarithmic
PWM Frequency: 2000Hz(default)
Safety and EMC
EMC standard: EN IEC 55015/EN IEC 61547, ETSI EN 301 489-1/-3
Safety standard: EN 61347-1/-2, EN 62493
Radio Equipment: ETSI EN 300 440
Certification: CE, RoHS, FCC
Warranty and Protection
Warranty: 5 years
Protection: Reverse Polarity, Over-heat, Over-load, Short circuit
Environment
Operation temperature: Ta: -30°C ~ +55°C
Case temperature(Max.): Tc: +85°C
IP rating: IP20
Mechanical Structures and Installations

RT1 Remote Key Function

RF LED Controller Kit V1+RT1 Wiring Diagram

Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key,
immediately press on/off key of the remote.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again,
Immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Reviews
There are no reviews yet.